China Good quality DCYK Series Hardened Gear hollow shaft Gearbox For Chemical and Crane industry with Great quality

Model Number: DCYK series Speed Reducer
Gearing Arrangement: Bevel / Miter
Output Torque: 4800-400000N.M
Rated Power: 7kw—2850kw
Input Speed: 750~1500rpm
Output Speed: 15-94rpm
Material of Housing: Cast Iron
Material of Gear: 20CrMoTi
Material of output shaft: high-strength alloy steel
Quality Control System: CE,ISO9001,OHSA18001,CCC
Rotation Direction: Normal or Reverse
Color: As your request
Industry Limitation: Without Industry Limitation
Gearbox Ratio: 100-500
Warranty: 12 Months
Packaging Details: DCYK gearbox in Plastic bag + PE foam + Wooden case + Metal strap
Port: HangZhou/ZheJiang

DCYK Series Hardened Gear Right Angle Gearbox
Feature

  • Small size, light weight, high precision, high load capacity, high efficiency, long life, high reliability, smooth transmission, low noise;
  • Gears are made of high quality alloy steel carburizing, quenching, from tooth surface hardness of HRC54-62; Air Conditioning Motor 20W Inverter Air Conditioning Brushless DC Fan Motor
  • The circumferential speed of the gear transmission is not greater than 20 m / sec;
  • Hardened cylinder gear reducer shaft rotation speed of not more than 1500 rev / min;
  • Working environment temperature -40-45 °C, if less than 0 °C, before the start of oil should be preheated to above 0 °C, the gear can be used for both directions running.
  • OVERVIEW
    DCY series is 3 stages according to the country standard of JB/T9002-1999,which are the products of the new period.
    This kind of reducers have 4 amounting arrangments,so the quanlity are excellent.
    This kind of gear box is used for mechanism,just like belt conveyor.The key components are finished with alloy steel.
    The gears and gear shafts are finished by gas carburising process and precise grouding to sequentially get high loading capacity of per certain volume.
    The efficiency of gear units can reach 95%.All of our goods are tested by our technical department,so the low noise is reached.
    Specification

    Item Name
    DCY Series Hardened Gear Right Angle Gearbox 90 degree Transmission used in heavy duty

    Model No.
    DCY Series

    Material
    Housing/cast iron

    Gear/20CrMoTi; Shaft/ High-strength alloy steel

    Input Speed
    750~1500rpm

    Output Speed
    15~94rpm

    Ratio
    16-50

    Input Power
    7~2850 Kw

    Service Factor
    /

    Pole
    3 pole

    Mamax Permissible Torque
    4800-400000N.M

    Quality Control
    System
    ISO9001-2008;CE; Hydraulic motor gearbox diesel engine gearbox shaft mounted gearbox IQNet

    Packing
    Plastic bag + PE foam + Wooden case + Metal strap

    Delivery
    15-30 days after order

    Picture Show

    Related Products

    H & B series Gearbox
    ZDY/ZLY/ZSY/ZFY series Gearbox
    DBY/DCY/DFY series Gearbox
    P series Planetary Gearbox

    NGW series Planetary Gearbox
    WP/NMRV/S series Worm Gearbox
    X, B series cycloidal reducer
    T series Gearbox

    Packaging & Shipping

    Factory Show CZPT Speed Reducer has committed ourselves to the research,design,production of speed reducer (changer) mechanical transmission at all times, which is the appointed enterprise designated by the Ministry of Machinery Industry and passed the ISO9001 international quality system certification.

    Certifications

    IQNet Certificate
    For CZPT Speed Reducer
    CE Declaration
    For CZPT Speed Reducer
    ISO 9001:2008
    For CZPT Speed Reducer

    FAQQ:What information should I tell you to confirm speed reducer?
    A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.

    Q:What if I don’t know which gear reducer I need?
    A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

    Q:What should I provide if I want to order NON-STANDERD speed reducers?
    A: Drafts, Dimensions, Pictures and samples if possible.

    Q:What is the MOQ?
    A: It is OK for 1 or small pieces trial order for quality testing.

    Q:Who I should contact?
    A:Please contact Ethan Wang if you need more help.
    Skype:Ethan_Gearbox /Cellphone: 13335201180

    Q:How long should I wait for the feedback after I send the inquiry?
    A: Within 12 hours

    Q:What is the payment term?
    A:You can pay via T/T(30% in advance+70% before delivery), L/C , Brushless Motor Controller 24V 250W Dc 12V Motor 200W 42Mm brushless dc motor West Union etc

    Q:What is the delivery time?
    A:Normally is 20-30days after order, for special model or big quantity please email to us for checking.

    Q:What is the guarantee time?
    A:12months

    Key Market Insights Related to Worm Reduction Gearboxes

    A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
    gearbox

    Backlash measurement

    Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
    A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
    Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
    The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

    Worm reduction gearboxes

    Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
    Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
    One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
    The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
    gearbox

    Worm reduction gearboxes with closed bladders

    The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
    A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
    Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
    Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

    Shaft arrangement of a gearbox

    The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
    The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
    The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
    Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
    gearbox

    Mounting of a gearbox

    In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
    The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

    China Good quality DCYK Series Hardened Gear hollow shaft Gearbox For Chemical and Crane industry  with Great qualityChina Good quality DCYK Series Hardened Gear hollow shaft Gearbox For Chemical and Crane industry  with Great quality