double reduction gear reducer

Worm Gear Acceleration Reducers: Double Reduction
Ever-Power. manufacturers double decrease Worm Gear reducers that are designed to last. Double decrease units are made with the same top quality pieces as the single decrease Worm Gear reducers.
Double Reduction Worm Gear Acceleration Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or stable shaft input
Combination of two single reduction reducers
Solid or hollow outcome shafts available
Several varieties of bolt-on bases available
Large tensile strength cast bronze worm wheel and a hardened and surface alloy steel worm made integral with the shaft for long and trouble-free life
All cast iron construction
9 Models: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Reduction Worm Gear Velocity Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day delivery on stock goods at no additional
cost
Twice reduction gearing mechanism is utilized in big machinery and automotives where in the speed must be reduced at a required level. For eg if the input speed is normally 2000rpm and the output rate desired is certainly 300rpm a reduction gearing system is used such as a reduction gear field. However in case of dual reduction mechanism, the reduced amount of speed takes place in 2 steps. At first the suggestions from the engine shaft includes a pinion mounted on it through couplings. This pinion equipment is then linked to an intermediate gear which is first decrease gear. This equipment is then connected to another low swiftness pinion on another shaft. This low speed pinion is linked to the next reduction gear which is attached on the propeller shaft which is the output.
Greaves Double Reduction Speed Reducers are two stage worm reduction models. A double reduction gear reducer exclusively designed primary worm reduction unit is integrally installed on a standard single decrease Greaves worm reducer which varieties the next stage. The composite models provide the most small and rigid arrangement for large reduced amount of speed necessary for slow going machinery. A wide selection of ratios upto 4900:1 is available.
The wormshafts are constructed with high quality case hardening steeL accurately generated, ground and superfinished. The wormwheels include phosphor bronze centrifugally cast rims of significant sections welded to rigid centres. Considerable overall flexibility of shaft layout can be permissible with all types of Double Reduction units
Ever-Power Double Decrease Worm Gearboxes will be two stage worm reduction units.
A specifically designed primary worm lowering unit is integrally mounted on a standard single lowering AGNEE worm gearbox which forms the second stage. The composite units provide the most compact and rigid arrangement for large reduction of speed necessary for sluggish going machinery. A wide range of ratios up to 4900:1 is readily available.
Double Decrease Worm Gear Package Sizes Available with us are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed certainly are a typical selection of commonly utilized ratios from the entire range of Ever-Power Dual Reduction Worm Gear Box. Details of other ratios available on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Release / Shaft Mounted Version / All sorts with motor installation adaptor /
motor – optional
The worm shafts are created from top quality case hardening steel, accurately generated, ground and super finished. The worm wheels include phosphor bronze centrifugally cast rims of considerable sections welded to rigid centers. Considerable overall flexibility of shaft layout is usually permissible with all sorts of Double Reduction models.
Product Description
The products are widely applied in the generating equipments of a myriad of industries domestic and overseas. They will be the best options for nowadays modern establishments of mechanical reducing travel control to recognize large twisting distance, significant gear ratio, low noise, high performance and low temperature.
Description:
Customized top quality double worm gear swiftness reducer aluminium gearbox lowering gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or since customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Large Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, area harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Products, Ceramics, Chemical substance, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral