electric fan motor

Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Air flow Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed electric fan motor china control switch. All of the wiring in the middle of your electric engine, capacitor and quickness control change is still installed nevertheless the cord itself is normally detached as seen in the photos. (Discover “Control Notice” below for alter type.)
T (See “App Notice” below for make use of in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” lengthy with a collection screw simple. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take notice: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you possess a pull-chain). If you order several motor at the same time, we will do our better to supply your purchase with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric engine in a nonfan program. This is a totally enclosed fan electric engine and designed to have constant ventilation over the motor casing for cooling. The casing isn’t vented and the electric electric motor will overheat and get into automated thermal overload if operate in a nonfan system where there isn’t solid ventilation past the engine. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the motor and cause it to proceed into automated thermal overload. (Your companion blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric electric motor is manufactured in China.