Right angle gearbox

Right Position Miter Gearbox Standard Features
Dimensions: right position miter equipment drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile steel. Any shaft can be utilized as a drive.
Gears: Hardened directly miter gears
Bearings: Hardened metal ball bearings, long lasting lubrication
Mounting: Three shaft installation positions provide versatility in application
Versatile: 3 shaft connections are provided for versatility in application
RAB-1 could be operated CW, CCW or BACK driven
RAB-1 is rated at 1/3 HP in 1800 RPM. Maximum acceleration is 3000 RPM
Benefits and Cost Savings
Longer service life
Less wear
Greater tooth-to-tooth contact
Quieter operation
The most effective power transfer design under rated load conditions
Custom Options
Stainless shaft (Make sure you specify series stainless needed)
Longer shafts lengths upon input and output
2:1 Ratio
Right Position Drives Made out of Advanced Quality Construction
Ever-Power 2-Way Right Position Gearboxes transmit power with quiet, dependable spiral bevel gears. These high quality bevel gearmotors feature hardened spiral bevel gears and non-magnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also compact and feature multiple mounting choices. The fully enclosed design guarantees the integrity of the inner gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Correct Angle 2-Way Gearboxes are made for maximum strength and heat dissipation. The drives are available with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We can quote several unique types of shafts as well, including:
Squared
Splined
Extended
Shortened
Stepped
Two Way 90 Degree Gearbox Applications
Ever-Power Right Angle Miter Gearboxes are used throughout a large number of industries in a huge selection of applications. Any make use of that demands the reliable transfer of rate or power, you could look for a two-method gearbox bearing the Ever-Power brand. The small design of Ever-Power Two-Way Right-Angle Gearboxes makes them ideal for applications such as:
Food Processing Equipment
Ovens & Dryers
Tumbling Barrels
Power Transmission Equipment
Register Controls
Stokers
Case Openers
Paper Rewinders
Test Equipment
Ever-Power Inc, offering the most dependable and reliable transfer of power out there. Our company is well known for its innovative styles and producing high-quality motion control solutions designed for engineered performance and durability. We offer a range of gearbox designs and a broad selection of versatile shaft couplings to supply you with a full solutions for your mechanical and power transmitting applications.
Right Angle Gearbox
Correct angle gearboxes are seen as a the fact that the drive shaft and the output shaft are organized at an angle of 90 degrees. Based on the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results within an axis offset.
Correct angle gearboxes are recognized with different types of gear teeth or a mixture of different gearing types. The most popular single-stage gearbox types are bevel and worm.
Because of the high single stage ratios and the low effectiveness level, worm gears can achieve a self-locking effect. With worm gears additionally it is possible to possess a hollow shaft as the drive shaft.
Bevel gearboxes come with various kinds of gearing. Bevel gearboxes with intersecting axes are understood using bevel gearing with straight, helical or spiral the teeth. Hypoid gearboxes have helical bevel gearing with that your axes cross with an axis offset. The bandwidth of technically practical ratios with which the bevel gear stage can be realized is bigger with hypoid gearboxes than with the classical bevel equipment teeth.
Bevel gearboxes can also be combined with other gearbox types. A regular application in this respect may be the mixture with a planetary gearbox, whereby the planetary gearbox could be linked upstream or downstream. This outcomes in a wide range of overall multiplication elements and wide variety of uses in lots of industrial applications.
The efficiency level of bevel gearboxes is normally less than that of coaxial spur gearboxes, particularly compared to planetary gearboxes. This is because the bevel equipment stage generates a higher degree of axial drive and radial power, which has to be absorbed by appropriate bearings. This increases the power loss, which is particularly notable in the drive stage of the gearbox.
The running noise and the transmittable torques of classic bevel gearboxes are also lower than with single spur gear teeth. Hypoid gearboxes, however, are extremely noisy and will transmit large amounts of torque, but a considerable amount of bearing load happens in the bevel gear stage of the gearboxes.
In summarizing, a right angle gearbox is at all times used when the quantity of installation space in the application is limited, or an angular arrangement between your drive and the output is required by the application. They are also used in instances where in fact the input shaft needs to be hollow in order to lead through lines or make use of clamping sets.
The advantages of right angle gearboxes:
Use when set up space is limited
Compact design
Can be coupled with other types of gearbox
Quiet and high degree of torque when using hypoid gearboxes
Version with hollow shaft possible
The disadvantages of right angle gearboxes:
Complex design
Lower efficiency level than planetary gearbox
Noisier
Decrease torques in single-stage ratio range
The Ever-Power, the original right angle gearbox drive, is widely recognized and is in use worldwide. The Ever-Power provides manual or power tranny of rotary movement in a COMPACT, standardized right angle unit.
Our standard type of bevel gearboxes can be found from share in both an ” and Metric Series, single or dual result shafts, 1:one or two 2:1 ratios, and grease lubricated forever and also have an operating temperature range of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Utilizing carburized case-hardened Coniflex* bevel gears, all Ever-Power units utilize totally enclosed & sealed ball bearings.
The cast aluminum housings on our 90 level gearboxes are precision machined, upon our CNC machining center and then coated with a chemical substance film to safeguard the materials, and use flanged ends and side bosses for compact installation in an array of applications.
The shaft materials used for sizes 1, 2 and 3 is #416 stainless. On the 2 2:1 models, the pinion shaft is definitely carbon steel. For the sizes 4 & 5, the material is black oxide carbon metal. Shafts can be given particular extensions (with flats, splines, holes, etc.) and /or specific lengths upon ask for.
In addition to our standard models, we will modify our units to meet your design specifications! Our product sales and engineering departments will be ready to help you with your specific application requirements.
Through the years we’ve received questions about almost every part of the gearbox selection procedure. One of the queries we’ve had several times is, “What is a right-angle gearbox or a right-position drive?” Or, more particularly, “How is a right-position gearbox or drive different from a swiftness reducer or other types of gearboxes?”
gear-speed-reducer-1-2.png
First, let’s focus on some basic terminology. It isn’t uncommon for the conditions “gearbox”, “drive” and “acceleration reducer” to be utilized interchangeably.
A gearbox is any gadget that uses a gear teach to transmit torque/rpm and whatever uses a gear to transmit torque/rpm is a gearbox.
A right-angle drive is a mechanism with a gear train that may transmit torque/rpm 90 degrees, to carefully turn a corner
A gear reducer is a mechanism with a gear train that may reduce rpm output. Due to decreasing rpm is increasing torque at the same ratio velocity is reduced.
A gear box can also be a speed increaser
The kind of gear used in the gear box defines it as a right angle or an inline drive.
A worm gear drive is a right-angle drive since is a bevel gear
A spur equipment drive is inline
A helical equipment is inline but can also be a right-angle drive
So, exactly what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It’s rather a 1 to at least one 1 ratio or a multiple of 1 1 such as for example 2:1 or 15:1. If the ratio is 1:1 it really is a right-position drive. If the ratio can be greater than 1:1 it really is a right-angle acceleration reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outside contaminants for smooth operation
Right- or left-hands rotation to convert power either direction
Easily slides axially along the drive or driven shaft for flexible positioning
Alloy steel helical gears for powerful
Built-in 5 sizes with three types of result shaft : hollow, projecting or double-extended. Moreover, yet another output shaft could be installed opposite to the insight shaft.
Three input types can be found : with projecting input shaft, with pre-designed motor coupling (bell and joint) and pre-engineered Small motor coupling.
Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined upon all surfaces for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all the internal components.
The mechanism of the gearboxes consists of two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of top quality bearings on all of the axis ensures long life to the gearbox and allows high radial and axial loads.
Gearbox housing, flanges, bells and covers are externally painted with BLUE RAL 5010.