small worm gearbox

Small Precison Worm Decrease Gearboxes
There are many of specifications you will have to consider when making a worm gearbox selection.
First, what’s the input and output torque requirements? Next, examine vendor horsepower/torque charts and select the correct worm equipment reducer.
If how big is the gearbox will probably be an important consideration after that check the reducer dimension specifications, not all producers make compact units. Actually, working with the proper supplier can help you not only find the right equipment reducer but also prevent some of the most common errors in reducer selection. We offer a free guide to assist you find the appropriate supplier to work with.
For low and fractional horsepower software we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major distinctions between these two models. Both feature the hollow or solid result shaft. Both models are compact and provide users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your particular application or project is essential to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps simple to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle gear motor is so versatile it could work just about anyplace.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built unique, high precision mini gearboxes that cannot be found anywhere else. Our miniature gearboxes are available in several configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide custom micro gearboxes that were created and built to meet your specific specifications.
E mail us for the mini gearbox your application requires, or demand a quote on a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, rate reducers, gear drives, and gearmotors. All terms can be used more or less interchangeably. Please note that the links for our small gear drives include details on the full range of body sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel container miniature gear drives are software rated for the the best possible balance of efficiency and cost. Torque could be balanced to meet your RPM and operating life requirements. Light-weight with low backlash efficiency (as little as 1°, with choice of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a compact package. They offer an result shaft at 90° from the input, and are obtainable in gear ratios from 1:1 to 40:1. Lightweight but durable, with machined aluminum housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc minutes of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from reverse sides of the casing; output is a keyed bore. Standard single- and double-end shafts can be found and supplied with keys and retainer rings. An array of equipment ratios and input sizes are available to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They provide two insight shafts on opposing sides of the body, with two result shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high performance overall performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the input. They deliver superior functionality in an amazing array applications and are constructed with little footprints, making them well suited for operations where space is limited. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for speeds up to 3,000 RPM. Light weight aluminum housings and stainless gears and shafts make these inline spur gearboxes hard and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver excellent performance with high efficiency, and show rugged building for challenging power transfer procedures. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are designed in extremely compact footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a custom miniature gearbox to meet up your unique specifications. We can produce custom micro gearboxes in any configuration the application requires, with output torque amounts as high as 900Nm. We are able to work from your gearbox styles, reverse engineer a preexisting unit, or assist you to develop an all-new style that delivers the performance you need. Demand a quote on a custom miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and special ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive crucial and retainer rings could be supplied to your specifications for just about any of our hollow bore miniature gearboxes. We provide a basic selection of single ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer rings.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our application engineers to discuss your particular needs.
We offer a broad collection of misalignment shaft couplings in in . and metric bore sizes. ” and metric precision ground shafts can be found from stock.
Contact Us for High Performance Miniature Gearboxes
We are the miniature gearbox specialists. All of our micro gear drive versions deliver superior functionality in a little footprint, and are tough enough for challenging function environments. E mail us to find out more about our mini gearboxes, or ask for a quote on a custom model that’s tailored to your needs.
Additional advantages of worm drive gearboxes include: