small worm gearbox

Small Precison Worm Reduction Gearboxes
There are many of specifications you will have to consider when making a worm gearbox selection.
First, what’s the insight and output torque requirements? Next, check vendor horsepower/torque charts and pick the correct worm equipment reducer.
If how big is the gearbox will probably be an important consideration then check the reducer dimension specs, not all manufacturers make compact units. Actually, working with the proper supplier can help you not just find the right equipment reducer but also prevent some of the most common errors in reducer selection. We provide a free guide to assist you find the right supplier to work with.
For low and fractional horsepower software you can expect two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output are the major variations between both of these models. Both feature the hollow or solid result shaft. Both models are compact and offer users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your unique application or project is vital to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is indeed versatile it could work just about anywhere.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built unique, high precision mini gearboxes that can’t be found anywhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that are designed and built to meet your specific specifications.
Contact us for the mini gearbox your application requires, or ask for a quote upon a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, swiftness reducers, gear drives, and gearmotors. All conditions can be used pretty much interchangeably. Please note that the links for our little gear drives include information on the full selection of body sizes for that series or style.
Bevel Box Micro Equipment Drive
Our bevel box miniature gear drives are software rated for the ideal balance of functionality and cost. Torque could be balanced to meet up your RPM and operating life requirements. Light-weight with low backlash functionality (as little as 1°, with choice of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They offer an result shaft at 90° from the input, and are available in equipment ratios from 1:1 to 40:1. Light-weight but long lasting, with machined aluminium housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single input shaft that protrudes from opposite sides of the casing; output is a keyed bore. Standard solitary- and double-end shafts are available and supplied with keys and retainer rings. An array of equipment ratios and input sizes are offered to meet up your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They provide two insight shafts on reverse sides of the frame, with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high effectiveness efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the input. They deliver superior efficiency in a wide variety applications and are built with small footprints, making them well suited for procedures where space is bound. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for speeds up to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver excellent performance with high efficiency, and feature rugged construction for challenging power transfer functions. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are built in extremely compact footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a customized miniature gearbox to meet your unique specifications. We can produce customized micro gearboxes in any configuration the application requires, with output torque amounts as high as 900Nm. We can work from your own gearbox styles, reverse engineer a preexisting unit, or help you develop an all-new style that provides the performance you need. Demand a quote on a custom made miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and output shafts with drive essential and retainer rings can be supplied to your specs for any of our hollow bore miniature gearboxes. We provide a simple selection of solitary ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our application engineers to discuss your particular needs.
We offer a broad collection of misalignment shaft couplings in in . and metric bore sizes. Inch and metric precision ground shafts are available from stock.
Contact Us for POWERFUL Miniature Gearboxes
We are the miniature gearbox professionals. All of our micro gear drive versions deliver superior functionality in a small footprint, and are durable enough for challenging work environments. E mail us to find out more about our mini gearboxes, or demand a quote on a custom made model that’s tailored to your preferences.
Additional benefits of worm drive gearboxes include:

Did you discover our small worm gearbox details useful, please allow us know