Split Taper Bushing

Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that is built for strength and strength. U1 bushings are being used in an extensively broad range of applications, which includes; sprockets, shaves, pulleys, gears, and much more, we likewise offer most of these items. What models this bushing apart is the high-quality steel building along with precise manufacturing and top quality control; this means that you always get yourself a premium quality steady product. What really models us apart from the other guys is our highly trained expert workers and our company-wide objective of customer satisfaction.
1. Be sure the tapered cone areas of the bushing and the within of the driven item will be clean and free from anti-seize lubricants.
2. Place the bushing in sprocket or additional part type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing continues to be loose to make sure sliding match on shaft.
4. With major on shaft, slide the sprocket or other component type to the desired Split Taper Bushing china posture on the shaft. Make sure you keep the heads of the cap screws available.
5. Align the sprocket or component type, tighten the screws alternatively and progressively until they will be pulled up tight. Do not make use of extensions on the wrench handles and don’t allow the sprocket or component to become drawn i contact with flange of bushing. At this stage there must be a gap between your bushing flange and sprocket, make sure this gap will not close.
Twice split barrel ensures concentricity
Grips the shaft with positive clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or tied to mounting screws
External key on most sizes for positive drive and greater torque carrying capabilities
Double-split barrel for great clamping
Solid flange to keep up concentric bores
Available in “, metric, and spline bores. Bore range from 3/8″ to 10”
Solid Flange & Double Split Barrel – Assures better concentricity to the shaft.
Key to Key Drive – With keys about both the shaft and merchandise to provide the strongest possible travel.
3/4″ per Foot Taper on Barrel – Self locking taper provides the highest degree of mechanical locking product to product.

Taper bushing are widely used together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are constructed of high quality engineered products with great tolerance. The characteristic is easy to use and needs no further alteration. These bushings can suit almost a myriad of assemblies and sizes. They will be the best choice in design for mechanical connections.
To complete designations add bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: total selection of both metric and imperial offered.
Standard range matches up to 125mm/5″ shafts & Hub diameter required will depend on the application.
Complete short reach range obtainable, for compact light assemblies & Clean, Compact Design.
Simple installation and removal.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and may be purchased on a single page as the pulley you will need.
For use with 1 3/16” shaft sizes.
Includes 2 set screws.