worm gear speed reducer
One reduction worm gearing offers high ratio reduction with few moving parts in a close-coupled compact drive. The proper angle set up of driving-to-driven machine requires a minimum of space. Input and output shafts can be prolonged in either or both directions in horizontal or vertical plans adaptable to any mounting requirement. Efficient motor speeds are decreased to slow speed requirements of many industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive use of the involute Helicoid Thread form (with leaving side contact) on the worm and gear provides for high efficiencies, and long service existence. The hardened surface and polished alloy metal worm develops a clean, work hardened surface area on the bronze equipment. Because of this worm gears wear in and improve with prolonged service while various other gears are wearing out. Ever-Power offers a broad collection of model configurations, sizes, ratios, and accessories from our standard products.
Fabricated Designs
If the application involves severe shock loads or feasible housing damage from external sources (as in steel mills or mobile apparatus applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength which allows the tranny of higher horsepower amounts than are possible with standard cast iron devices. Extra heavy side plates connect the worm and gear shaft bearing supports, assuring appropriate meshing of the apparatus under all load conditions. In smaller sized sizes, fabricated steel reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can provide custom quickness and reversed engineered reducers for your application, be it a new project or a direct drop-in replacement for a competitor’s rate reducer. Fabricated metal reducers enable Ever-Power to match a competitor’s footprint, centerline, and shaft height allowing a direct drop-in alternative saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our design also incorporates a hardened, ground and polished alloy steel worm. This mixture develops a simple, work-hardened mating surface area of the bronze gear which improves with prolonged service.
Worm gearing is a class of gear reducers that utilizes right angle, nonintersecting shafts. This form of reducer provides even and quiet operation and allows for the likelihood of large quickness reductions. These gears are available from stock in a wide variety of ratios, from only 4:1 to as much as 3600:1. The compact design and building allows worm equipment reducers to be placed in a comparatively small space. Thus, very high reductions in a limited package size can be achieved with this configuration. Our worm gear features the continuous sliding tooth action between worm and the teeth. This escalates the tolerance for large loads and shock loads. Worm gear drives offer users high reducing convenience of relatively low cost in comparison with some other types of gearing.
The usage of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series base on years of experiences uses designed teeth surface with unsurpassed torque transfer performance with great functionality, efficency and cost.Worm gear system transmits power through sliding get in touch with, resulting in extremely low vibration , sound, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for serious impacts. Outer cooling fins and internal lubrication oil diversion channel style to improve heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm equipment reducer is one kind of reduction gear package which includes a worm pinion insight, an output worm gear, and includes a right angle output orientation. This type of reduction gear package is generally used to take a rated motor velocity and produce a low speed output with higher torque worth based on the reduction ratio. They often can solve space-saving problems because the worm gear reducer is one of the sleekest decrease gearboxes available due to the little diameter of its result gear.
worm gear reducerWorm equipment reducers are also a popular type of swiftness reducer because they provide the greatest speed reduction in the tiniest package. With a higher ratio of speed reduction and high torque output multiplier, it’s unsurprising that many power transmission systems utilize a worm gear reducer. Some of the most typical applications for worm gears can be found in tuning instruments, medical tests equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm gear reducer, the SW-1 and the SW-5 and both are available in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are manufactured with rugged compression-molded glass-fill up polyester housings for a long lasting, long lasting, light weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Features
Our worm gear reducers offer a choice of a solid or hollow output shaft and show an adjustable mounting placement. Both SW-1 and the SW-5, however, can withstand shock loading better than other decrease gearbox designs, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also referred to as worm gearbox or worm acceleration reducers. Worm equipment reducers are utilized for speed decrease and raising the torque for electrical engine drives. You can decide to mount your NEMA engine to the reducer by using the NEMA C encounter flange or make use of a coupling. If you want a coupling for the result or input shaft see our coupling section for selecting a coupling. We offer four assemblies left hands and right hands and double result shaft and shaft input and shaft result. Interchangeable with the majority of worm gear manufactures. Find data sheet in product overview for diamensions. Unless you see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear swiftness reducers are available in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes available on request). Result torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are well suited for water/waste-water products drive applications such as for example thickeners and clarifiers, which require a vertical down shaft. Other available configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or other process or materials handling systems where large torques/slower speeds are needed.
These reducers are also obtainable with a helical primary reduction stage and are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow velocity, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Description
The HDR Series worm gear reducers are used in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive versions are 56C or 145TC flange install with either right, remaining or dual result shafts or a hollow bore result. The indirect drive versions are shaft input-shaft output boxes for use with sprocket or pulley drive systems. They offer an effective low cost solution to speed decrease and improved torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will have to determine the required torque and provider factor for the application form. Click on “Specs” above for a table that will aid in determining the service element. For service elements above 1.0, multiply the required torque by the support factor.
Our regular 700 Series – the heart of Ever-Power speed reducer product line – has been serving industry reliably for over 40 years. Its proven modular design has set the sector standard for overall performance and may be the most imitated product in the current worm gear velocity reducer marketplace. But why settle for a knock-off when you can have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility permits installation in practically any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, in addition to greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Rated! Inexpensive!One-piece gearcase, without external ribs, is constructed of close-grained cast iron and for rigid gear and bearing support. It also offers excellent heat dissipation.Dual lip, spring-loaded seals guard against oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and ground alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Oil sight gauge for ease of maintenance (not available on sizes 25 and 34).Factory oil packed.Every unit test run prior to shipment.Universal installation with bolt-on foot.Highly modifiable design.All this at substantially reduced prices than you have already been accustomed to paying for reducers of lesser quality. Less
Our worm gear speed reducer is the freshest as well as most ingenious in the marketplace.