We are focused on research and expansion of items that meet the increasingly superior electronics industry and are widely used in computers, home appliances, consumer electronics, communications, facts, industry, medical and additional fields.
We also has patent for 360 degree AC PIN interchangeable type adaptor and it is leading the world’s special design.

Ever-Power provides goods which are smaller, lighter, more electricity efficient, and better to use.
We selling products worldwide and get the certifications for each and every of country. And in addition Pto Adapter china acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet up with the latest regulations.
Gear adapters install between the vehicle transmitting and power take-away, and may serve several purposes. Mostly, adapters are used to change the path of rotation of the PTO outcome shaft. They can even be employed to space the PTO out and from the transmission case. On some imported or non-SAE common transmissions they allow for the mounting of typical 6-bolt electricity take-offs. Gear Adapters can be found to fit most popular transmissions.
Different body configurations: Can relocate the PTO output shaft to boost clearance for a driveshaft or direct-coupled pump
Improvements PTO shaft rotation: Matches PTO rotation compared to that of the driven equipment
Standard and nonstandard bolt patterns: Complements SAE regular PTOs to nonstandard transmissions

• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ metal tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; optimum of 22 GPM (produces 20 to 40 HP from the power remove)
• No need to modify vitality take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with engine, hydraulic hoses and toned faced couplers
• Ideal for three point electrical power take off gear – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches give a safe means to protect operators and expensive machinery from scenarios when the inertia of PTO driven implement exceeds and over-runs the tractor PTO speed. In such a case, the over-running coupler will free-wheel
smoothly and securely. Over-running clutches will normally stand up to applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Intense shock loads or drive line angularity will reduce this capability
If the length of your PTO does not fit flawlessly within a tractor, a PTO adapter can extend the size without needing to replace it for a new one. This adapter has an overall amount of 7-3/16″ with a man end 1-3/8″ x 6 spline and a female 1-3/8″ x 6 spline end.
Create additional size on the finish of your PTO. This tractor PTO shaft adapter provides both a lady 6 spline end and a male 6 spline end, each end includes a diameter of 1-3/8 in. This allows more connection choices and is ideal for anyone that owns an older tractor since the older parts might not be produced any longer and so are less common.
The over-running coupler is an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run generating source. The coupler drives solidly from tractor to put into practice and free wheels efficiently when apply exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Essential with 1000 RPM gearcase upgrade or 3 Point Hitch package for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter may be the perfect meet for your Shop Dog. It really is conveniently carried in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter reduces the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall amount of 6-3/8″ and is rated for tractors up to 70 HP.