EP offers a complete range of modular servo gearboxes /worm reducers. The modular design allows for configurations with motor source flange and result pinion for rack and pinion drives, together with solid end result shafts, Hollow bore outcome, and input shafts for all the positioning applications. The modular design and style allows for common mounting of the gearbox in virtually any orientation.
Servo-Worm Reducers were especially developed for make use of with the latest servo motors in applications that demand exact positioning and repeatability.
These reducers are ideal for applications in materials handling, automation, equipment tool, and robotics.
The light-weight modular aluminum housing design allows for easy machine integration, and excellent heat dissipation. A wide variety of suggestions flanges and couplings can be found to permit easy mounting of nearly any servo-motor and custom made flanges can be accommodated. Output configurations with pinion, hollow bore, or sound shaft are available and will be configured for suggestions with motor flange, free input shaft, or both free input shaft and motor flange.
An optimized worm gear tooth design insures great efficiency while at exactly the same time decreasing backlash. Two degrees of backlash are available, Precise or Extra-specific, with backlash amounts to significantly less than 3 arc minutes.
Available in 6 sizes
Ratios from 2 to 60:1
Torque Capacity up to 4400 Lb.-Ft. (6000 Nm)
Input Boosts to 6000 RPM
Two backlash levels – Precise and Extra-precise.
Modular design appropriate for rack & pinion system
4 input styles
7 output styles
28 possible standard configurations
Features
Wide variety of servo gearboxes, designed to fit almost all servo motors on the market
Designed for the highest torsional stiffness and the lowest angular backlash, designed for the maximum torque and overhung loads
Bush with slot machines and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The right technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and nonstandard designs.
High-Torque (HT) Servo-Worm Reducers
This standard selection of Servo-Worm Reducers are perfect for use in applications that demand high repeatability, precise positioning and performance. They were specifically developed for work with with state-of-the-art servo electric motor technology, providing tight integration of the motor to the unit. Angular backlash of significantly less than 1 arc-moments is provided standard.
They are available in four sizes (50 mm to 100 mm center length) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of electric motor couplings and mounting flanges are for sale to assembly to nearly all servo motors, and the hollow bore productivity can be used to mount end result shafts, pinion shafts, or other drive elements.
Normal applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic digital line shafting. Industries dished up include Material H, Automation, ling, Robotics, Aerospace and Machine Tool.
Gearing: Internal gear style was optimized to supply an angular backlash of significantly less than 1 arc-minutes in assembly, with the option of “in the field” adjustable backlash in the event that necessary.
Bearings: Input angular contact bearings for high insight speed, and robust end result tapered-roller bearings for great radial and axial load capacity.
Housing: Light weight aluminum housing for good heat dissipation, with essential suggestions flange for servo motors and general mounting on any deal with.
Output: The result bore is available with a compression-type hub or a ISO 9409-1 flange (see dimension pages). We offer a line of equipment to adapt these outputs to right shafting, Rack & Pinions, or other gearing types.
This gearbox utilizes a 30:1 ratio worm-drive reduction for applications that want extremely slow and smooth rotational motion. The worm-drive design not merely minimizes backlash but as well eliminates back-traveling the gearmotor so a posture can be placed even when power isn’t applied. The precision surface 3/8” stainless steel result shaft is backed by dual 3/8” ABEC 5 ball bearings to aid lots from any orientation. The ¼” ABS plastic and metal structure provides a rigid framework without adding unnecessary weight and is conveniently attached to any flat surface by utilizing the bottom mounting tabs. Our Typical Spur Gear motors will work with this gearbox (electric motor marketed separately). The Vertical Shaft Worm-Drive Gearbox is exquisite for turn-tables, time-lapse devices and low-acceleration applications that want high precision and torque.
Motor RPM required = 1 / (moments per rotation desired / 30)
Example: 1 / (10 minutes per rotation / 30) = 3 RPM motor needed to achieve 10 minutes per rotation (at max speed)
now provides an economical right position gearhead for employ with small NEMA 23 through 56 and similar little metric servo and stepper motors. These reducers are most appropriate for basic motion and source speeds of 2000 rpm where profile program costs certainly are a major consideration.
7 sizes with torque capacities up to 684 Nm
12 exact single level ratios from 7:1 to 100:1
2 stage ratios available
Inch or metric end result shafts
Hollow output standard, place shafts optional
2D and 3D drawings obtainable online
Flexible servo motor interface
Clamp-design hub provides zero-backlash engine shaft connection
Aluminum diecast casing for low weight
Large result bearings accommodate higher radial loads
Inch or perhaps metric hollow bore with keyway, solo and dual plug-in shafts also available
Double lip outcome seals provide maximum protection against contaminants
Face or base installation options, bolt on flanges and torque arms also available
Bronze wheels cast in the end result shaft for higher strength
Hardened and surface worm shaft provides soft operation
Reducer completely sealed for general mounting and long-life lubrication
Two bearing worm support isolates engine bearings from radial and axial loads
Flexible coupling element eliminates electric motor misalignment and bearing wear
Worm Gears are best suited angle drives providing large quickness ratios on comparatively short center distances from 1/4” to 11”. When correctly attached and lubricated they function as quietist and smoothest jogging type of gearing. Because of the high ratios conceivable with worm gearing, optimum speed reduction can be accomplished in less space than a great many other types of gearing. Worm and worm gears are powered by non-intersecting shafts at 90° angles.
EFFICIENCY of worm gear drives depends to a large level on the helix position of the worm. Multiple thread worms and gears with bigger helix angle prove 25% to 50% better than sole thread worms. The mesh or engagement of worms with worm gears generates a sliding action creating considerable friction and increased loss of efficiency beyond other styles of gearing. The usage of hardened and surface worm swith bronze worm gears boosts efficiency.
LUBRICATION can be an essential factor to boost efficiency in worm gearing. Worm equipment action generates considerable warmth, decreasing efficiency. The amount of vitality transmitted at confirmed temperature increases as the proficiency of the gearing boosts. Proper lubrication enhances proficiency by reducing friction and heat.
RATIOS of worm equipment sets are dependant on dividing the amount of teeth in the apparatus by the number of threads. Thus solitary threads yield larger ratios than multiple threads. All EP. worm equipment sets are available with either still left or right hands threads. EP. worm equipment sets are offered with Qua, Triple, Solitary and Double-druple Threads.
Basic safety PROVISION: Worm gearing should not be used as a locking mechanism to hold heavy weights where reversing actions could cause harm or personal injury. In applications where potential harm is non-existent and self-locking is desired against backward rotation then use of a single thread worm with a minimal helix angle immediately locks the worm equipment travel against backward rotation.
Materials recommended for worms is certainly hardened steel and bronze for worm gears. Even so, depending on the application unhardened steel worms operate adequately and extra economically with cast iron worm gears at 50% horsepower ratings. In addition to metal and hardenedsteel, worms can be found in aluminum, nylon, bronze and stainless; worm gears can be purchased in steel, hardened metal, stainless, aluminium, nylon and non-metallic (phenolic).
EP also sells gear tooth measuring units called GEAR GAGES! Gear Gages reduce mistakes, save money and time when identifying and ordering gears. These pitch templates can be found in nine sets to recognize all the normal pitch sizes: Diametral Pitch “DP”, Circular Pitch “CP”, Exterior Involute Splines, Metric Module “MOD”, Stub Tooth, Excellent Pitches, Coarse Pitches and Unusual Pitches. Make reference to the section on Equipment GAGES for catalog quantities when ordering.

To check out a full summary of Servo Worm Reducer click right here.