helical worm gear motor
Helical-worm gearmotors
Due to their design and from being coupled with a helical gear stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. Also, they are extremely low-noise and thus avoid high sound emission levels.
Low-noise continuous operation: equipment unit combination optimized regarding efficiency
Do you anticipate a drive remedy to impress you with its high level of overall performance and efficiency? In that case, we would recommend our high-quality helical-worm gearmotors EP to you. These could be implemented separately in the modular program. In this manner, they offer you an enormous range of sizes, gear ratios and motor sizes.
However, their greatest power is definitely their running smoothness and their incredibly low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you opting for a robust drive solution which you will hardly actually hear.
The overall concept offers you many more practical product characteristics and benefits. These include the significantly higher performance of the helical-worm combinations as opposed to single helical-worm gear units. This is one way you save additional energy in the procedure of your systems and are able to noticeably reduce ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to suit your person requirements – with a wide variety of AC motors. Furthermore, you can freely configure all the relevant properties. In this way, you can effectively utilize all the benefits offered by this combination of low-noise helical-worm equipment unit and performance-optimized motor. Even greater variance may be accomplished because of the optional flange or foot-mounted design and by selecting between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you already are saving time and money with this selection and project planning. The reason being our modular system enables a multitude of combination options for gear models and motors. You can therefore reduce operating costs, depend on an extended service life and reap the benefits of simplified maintenance that’s characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than solitary helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm steering wheel provide exceptional durability and lengthy service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear systems are helical/helical-worm combinations, so they are more efficient than normal helical-worm equipment units. Because of their outstanding efficiency, these drives can be used in every commercial sector and tailored to person torque and acceleration requirements. The reduction ratios afforded by the helical-worm gear stage and the low noise levels during procedure make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique combination of optimized worm wheel materials with special lubricants, optimized form, this powerful motor achieves high degrees of efficiency and torque. The casing machined on all sides enables diverse mounting options. Double chamber shaft seals are used as standard.
The low contour design makes it ideal for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and floor worm gears: Provides higher efficiencies and greater torque capacity in smaller sizes.
Multiple Input Options: Essential gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, mounting pilots and flanges offer a wide range of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Retains contaminants and water away.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements plus modular design to accept brakes, encoders or pressured cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors arranged new standards for reliability, performance and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration now and a truly future proof alternative. The EP gear electric motor offers total flexibility in mounting choices includes shaft, base, encounter, and flange solutions. The motor terminal box could be mounted in option positions rotated in 90º steps around the electric motor frame providing for unparalleled integration options.
EP gear motors comply with North American and International criteria, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total option for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series can be dirt tight and hose evidence,and can be used outdoors or in wet and dusty conditions without the utilization of additional enclosures. Complete rated output is available at the result shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Due to the unique combination of optimized worm wheel materials with special lubricants and optimized form, this powerful geared motor achieves high degrees of efficiency and torque. The low contour design makes it suitable for implementing applications electronic.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, durable helical gear drives with long life performance features and simplified maintenance. The use of condition of the artwork helical and worm gear combinations affords optimum overall performance fulfilling a wide variety of ratio requirements. The 800 BR is certainly functionally interchangeable with the majority of major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All units shipped pre-lubed for your particular mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and direct input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Double and triple reduction ratios
Flanged or foot mounted
All products adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared engine. A favorably priced choice for the standard duties anticipated of a right-angle drive.
5 gear sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors offered with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC motor are directly flange mounted, the pinion is on the electric motor shaft. This integrated compact design is an essential aspect for the high accuracy and the extraordinary stiffness of EP geared motors.
For vector-controlled inverter procedure utilization of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power powerful worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are manufactured from case hardened alloy steel and the flanks are precision floor. The worm wheels are made from special wear-resistant bronze. Helical worm gears are equipped with a helical equipment. Worm gears with shrink disc, torque limiter, along with adjustable backlash styles are also component of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal design. The housings are produced from top quality cast iron. The rugget wall space and internal ribbing ensure incredibly torsional stiff and sound dampening housings. The exterior ripping provides a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with durable walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision surface flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available as solid shaft or hollow shaft
Shrink disc, torque limiter,along with adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

To learn more on helical worm gear motor, visit our website.